On-site Bidders: Register day of auction. Arrive at least 30 minutes prior to the auction start time and register at the auction office.
Online Bidders: Register here Register 24 hours prior to start of auction. Must have deposit or bank letter of guarantee to bid. Call for wire instructions.
Inspection
Day prior to auction from 9AM - 4PM
Buyers Premium
On-site: 15% Buyer's Premium (will be added to bid price)
Online: 18% Buyer's Premium (will be added to bid price)
Taxes
Sales tax rate is 7.25%. We will charge local sales tax unless you have your tax exempt number with you or have it faxed to our office. Our fax number is 513/738-0221.
Lodging
Directions
Hampton Inn (915) 833-7000 6411 S Desert Blvd. 79932 Holiday Inn Express (915) 587-5885 7935 Artcraft Rd. 79912 Comfort Inn (915) 225-7890 6645 Gateway Blvd. W. 79925
From El Paso, Texas, take I-10 West to Exit #6A for Texas Loop 375 / Transmountain Road. Continue at the top of the exit straight on to the Northbound bypass road. Go approx. 3 miles to the first underpass, then continue Southbound on the bypass road Southbound for 1 mile & turn right onto Los Mochis Dr. Auction site is at the end of the road on the right
Removal of Purchases
Removal begins after the last item is sold and lasts for one hour (or until 5PM). Removal will continue the next morning and on all weekdays from 8AM to 5PM. Last day for removal is Friday, 2/13/15. RIGGING AND REMOVAL IS THE RESPONSIBILITY OF THE BUYER. Small, carryout items, should be removed immediately after the auction or the day after the auction. Anyone, either a buyer or rigger, who uses a powered vehicle to remove anything from the auction site, will need a certificate of insurance.
CERTIFICATE OF INSURANCE
Riggers
HOLDER: Johnson Plate & Tower Fab. 201 Los Mochis Drive, Canutillo, TX 79835 ADDITIONAL INSURED: Myron Bowling Auctioneers, Inc. RE: (auction site address) AMOUNTS: General Liability - $1,000,000 each occurence $2,000,000 General Aggregate Business Auto - $1,000,000 Combined Single Limit
Error: Folder "F:\www\myronbowling\_filelib\ImageGallery\2015_Auction_Images\Johnson\Johnson_JPGs" could not be found.Error: Folder "F:\www\myronbowling\_filelib\ImageGallery\2015_Auction_Images\Johnson\Johnson_JPGs" could not be found.
LARGE PAINT BOOTH AND OVEN LINE & RELATED
2010 GLOBAL FINISHING (GFS) 24’ x 24’ x 124’ Drive Thru, Cross Draft, Pressurized Spray Booth, Model CDG-2424-PDT-124, (2) 20’ x 20’ Roll Up Doors, Exhaust Fan, (144) Lights, (8) Man Doors, Booth-Mounted Direct Fired AMU, 18 Ga. Galvanized Panel Construction, 26’8” W x 25’6” H x 125’ Approx. Overall Dimensions, 36’ Approx. Height to Top of Structure, Natural Gas Air Make Up, Purchased 12/2009 at Cost of Approx. $260,000 (Does not Include Installation), Capacities Approx. 2010 GLOBAL FINISHING (GFS) 24’ x 24’ x 124’ Drive Thru, Low Temp Oven, Model LTOE-424-PDT-124, Approx. 120° Max. Temp., (2) Roll Up Doors, Exhaust Fan, 18 Ga. Galvanized Panel Construction, 26’8” W x 25’6” H x 125’ Approx. Overall Dimensions, 36’ Approx. Height to Top of Structure, Natural Gas Air Make Up, Purchased 12/2009 at Cost of Approx. $250,000 (Does not Include Installation), Capacities Approx. Exterior Shell for Conversion to Free-Standing Outdoor Use Including Siding and Structure, Approx. 20’ Chamber Between Spray & Oven Booths 2010 GLOBAL FINISHING SOLUTIONS (GFS) Paint Kitchen, Model PK-22, (2) GRACO Extreme X90 • (6) GRACO Extreme • (5) GRACO Drum 2010 QUINCY 125-HP QSI-500 Air Compressor, Model PT35E-BC-5.22-12.00, S/N BU0903240001, Pneumatic Products Desiccant Dryer System Complete w/Fire Suppression, Air Breathing, Central Control & Related (4) TURBINAIR Becca Solvent Recyclers, Model 25000 500-KVA Primary Transformer, 13,800 Volts
2008 SERTOM 2.75” x 10’ Hydraulic Plate Bending Rolls, Model EMO, Type 31-60, S/N 229, 2.75” x 10’ Approx. Roll Cap., 2.36” x 10’ Approx. Pre-Bend Cap., 10’ Useable Roll Length, 25.6” Top Roll, 22” Lateral Roll Dia., 6.1” Max. Opening Between Top/Side Roll, Drop End, Roller Feed Tables, Overhead Support (Capacities Approx.) BERTSCH 1-3/4” x 10’ (Approx.) Initial Pinch Mechanical Plate Bending Rolls, Model 18, S/N M-8264, 17” Top Roll BERTSCH 3/4” x 12’ (Approx.) Mechanical Plate Bending Rolls, Model No. 14, S/N M-7727, 14” Roll Diameter, Drop End (Currently Not Installed) WEBB 6’ Mechanical Plate Bending Rolls, 6” Diameter, Drop End
ANGLE BENDING ROLLS
HAEUSLER 9.9” x 9.9” x 0.95” Horizontal Mechanical Angle Bending Rolls, Model MPR-40H, S/N 304W01015380V, 2-Control Stations, 9.9” x 9.9” x 0.95” Angles Leg Out to 158” Min. Dia., 8.7” x 8.7” x 0.87” Angles Leg In to 162” Min. Dia., 4.7” x 4.7” x 0.59” Smallest Angle, NP-60 I-Beams to 130” Min. Dia. (Capacities Approx.) JPT 4” x 4” x 1/2” (Approx.) Capacity Mechanical Vertical Angle Bending Rolls, 15-1/2” x 20” Bending Die Size JPT 3” x 3” x 3/8” (Approx.) Capacity Mechanical Horizontal Angle Bending Rolls, 7” x 11” Rolls
HYDRAULIC PRESS
PACIFIC 250-Ton Pressformer Gap Press, Model 250PF, S/N 3676, 54” x 24” Table, 24” Throat
CNC PLASMA / OXY CUTTING TABLES
LTEC CM-360 CNC Plasma / Oxy Cutting Table, S/N 92-2000-3789, (2) Tanks: 65’ x 153” & 30’ x 153”, Single Plasma Head, (2) Oxy-Acetylene Heads, Ltec Plasmarc PHC-601 Plasma Power Supply, Burny Phantom Control (Control New 2007) ARONSON CNC Plasma / Oxy Cutting Table, (2) Tanks: 65’ x 147” & 30’ x 147”, Single Plasma Head, Hypertherm H-601 Plasma Power Supply, Hypertherm Cooler Tank, Silverstar Chiller, Model SAC-05, Burny 5 Control 45’ x 100” Oxy-Acetylene Shape Cutting Table, (2) Oxy-Acetylene Heads, Burny Replicator 900 CCD Controls
FABRICATION MACHINERY
CINCINNATI 12’ x 5/8” Hydraulic Power Squaring Shear, Model 5FL12, S/N 34222, 19” Slitting Slot, Roller Ball Table, 50” Power Back Gage, Rear Scrap Conveyor WHITNEY 6” x 6” Hydraulic Angle Shear Line, Approx. 50 Ton, 42’ x 16” Power Roller Conveyor w/Chain Drive Loader, 50’ x 16” Exit Roller Conveyor w/Mechanical Stop LODGE & SHIPLEY 375-Ton Mechanical Press Brake, Model S250A10, S/N 46468, 12’ Overall, 12-1/2” Throat, 126” Between Housings, 4” Stroke, 12” Shut Height, 250-Ton Punch, Air Clutch, ISB PC300 Press Control ROCKFORD 100-Ton (Est.) Hydraulic C-Frame Punch, 12” Throat, 10-HP Hydraulics (1) CLEVELAND Mechanical C-Frame Punch, 37” Throat • (2) CLEVELAND Mechanical C-Frame Punch, 26” Throat • (1) Mechanical C-Frame Punch, 9” Throat • Punch Dies
TOWER SECTION FIT-UP PRESS
2009 JTP Built Tower Can Fit-Up Press, 10’ Throat, Ejector Ram, (2) Sets of Track Traveling Hydraulically Adjusted Turning Rolls, Average Section Dimensions: 10’ Long x 15’9” Dia. x 2” Plate
LARGE RAIL-MOUNTED TRANSFER TABLES/CARS
(3) Rail Transfer Tables, 100’ Length, 84” Rail Width, (6) Undercarriage Rails/Car, (1) 90° Rotation Transfer Table • Outdoor Use for Handling Tower Sections
WELDING MANIPULATORS
Most updated w/Late Model Lincoln Welding Equipment PANDJIRIS Welding Manipulator, Rail-Mounted w/59” Rail Centers, 125” Rail Travel, 17’ Manipulator Arm w/10’ Elevation, Lincoln Powerwave AC/DC-1000 Power Supply, Lincoln Powerfeed 10A Wire Feed, Flux Hopper, 12” x19” Power & Idler Rolls w/63” Centers PANDJIRIS Welding Manipulator, 11’ Arm, 9’ Elevation, Lincoln DC-1500 & DC-1000 Power Supplies, Lincoln NA-3S Wire Feed, Seco DS-9000 Speed Control, Flux Hopper RANSOME Welding Manipulator, Model 1012RF, S/N 6220280, 13’ Horizontal Reach, 10’ Elevation, Lincoln DC-1000 Power Supply, Lincoln NA-3S Wire Feeder, Seco DS-9000 Speed Control, 7" x 19" Power & Idler Rolls w/60” Centers
WELDING GANTRY SYSTEMS
Designed to Weld the Outside Circumference of Tank/Tower Sections. Most updated w/Late Model Lincoln Welding Equipment GOURAN Seam Welding Gantry, 10’ Max. Seam, 16’ Between Uprights, Lincoln Powerwave AC/DC-1000, DC-1000 & DC-600 Power Supplies, Lincoln Powerfeed 10A & NA-3S Wire Feeders, Jetline Seam Tracker Control, Flux Hopper Welding Gantry System, 175” Between Uprights, Elevating Platform, Lincoln Idealarc DC-1000 Power Supply, Lincoln NA-3S Wire Feeder, Seco DS-9000 Speed Control, Flux Hopper, Rail-Mounted Turning System w/Aronson 54” x 54” Positioner, 12” x 19” Power Turning Rolls w/72” Centers, 11” x 19” Idler Turning Rolls w/54” Centers Welding Gantry System, 15’ Between Uprights, Elevating Platform, Lincoln Powerwave AC/DC-1000 Power Supply, Lincoln Idealarc DC-1000 Power Supply, Lincoln Powerfeed 10A & NA-3S Wire Feeders, Flux Hopper
BOOM WELDERS
Designed to Weld the Inside Circumference of Tank/Tower Sections. Most updated w/Late Model LINCOLN Welding Equipment CALAVAR Rail-Mounted Boom Welder, Model 6066, S/N P144-004435, 722” Welding Height, 637” Reach, 84” Rail Mount, Lincoln Powerwave AC/DC-1000 Power Supply, Lincoln Powerfeed 10A Wire Feed, Flux Hopper Rail-Mounted Boom Welder, 56’ Reach, 66” Rail Centers, Lincoln Idealarc DC-1000 Power Supply, Lincoln NA-3N Wire Feeder, Seco DS-9000 Speed Control Flux Hopper & Conveyor, (1) Power & (2) 12” x19” Idler Turning Rolls w/60” Centers Boom Welder, 52’ Reach, Lincoln Powerwave AC/DC-1000 Power Supply, (2) Lincoln Powerfeed 10A Wire Feeders, Jetline Seam Tracker Control, Flux Hopper
TANK TURNING ROLLS
Most rolls were built by JTP & are 60-ton capacity heavy duty dual drive units w/grove gear boxes (6) 60-Ton Approx. Capacity Power Rolls: 12” x 19” w/60” Centers • (3) 11” x 17” w/60” Centers • 11” x 14” w/60” Centers • 7” x 17” w/60” Centers (12) 60-Ton Approx. Capacity Idler Rolls: 12” x 23” w/84” Centers • (3) 12” x 19” w/68”, 60" & 42" Centers• (3) 12” x 17” w/60” Centers • (2) 11” x 17” w/60" & 54” Centers• (3) 7” x 19” w/60” Centers (17) 60-Ton Approx. Capacity Track-Mounted Power Rolls: (13) 7-1/2” x 22” w/84” Centers (84” Track Centers) • (4) 6” x 20” w/80” Centers (66” Track Center) (10) 60-Ton Approx. Capacity Track-Mounted Idler Rolls: 7-1/2” x 22” w/84” Centers (84” Track Centers) (2) ARONSON Tank Turning Roll Sets: 7” x 19” Idler Rolls w/54” Centers & 12” x 19” Power Rolls w/54” Centers • 7” x 19” Idler Rolls w/57” Centers & 12” x 19” Power Rolls w/57” Centers
WELDERS & RELATED
HOBART Rotary Welding System w/160” Rotary Positioner, Hobart RC-750 MIG Power Supply, Hobart Wire Feeder & Voltage Control (8) Plasma Power Supplies: (3) LTEC PHC-601 Plasmarc • (2) HYPERTHERM MAX 200 • (3) HYPERTHERM MAX 100 NELWELDER Stud Welder • (32) LINCOLN DC-600 MIG Power Supplies • (3) AIRCO 300 & 250 AMP Stick Power Supplies • (14) LINCOLN LN-9 Wire Feeders • (2) PHOENIX 300 Dry Rod Ovens (10) VICTOR Track Burners • (1) ESAB Track Burner • Track Burner Rails & Parts • (New) LINCOLN KP 1998-5 Guide Tubes • Welding Leads & Blankets • Oxy-Acetylene Torch Carts • w/Hoses & Regulators (28) Boxes LINCOLN Innershield 5/64” Cored Wire • (18) Boxes LINCOLN Lincolnweld L-61 1/8” Wire • (100) Bags LINCOLN Submerged Arc Flux
VERTICAL TURNING LATHES
BETTS Vertical Turning Lathe, S/N E7677-11, 155” Table & Swing, 92” Under Rail, (2) Master Machining Heads, Model SP585-26950, 20-HP, Rebuilt & Modified by JPT 2000’s to Machine Faces of Large Dia. Parts
RADIAL ARM DRILLS
(2) G&L BICKFORD Chipmaster 19” x 9’ Arm Radial Arm Drills, S/N 956-00294075 & 956-00261-74, Power Elevation (2) CARLTON 19” x 8’ & 15" x 6' Radial Arm Drills, 15-1500 RPM, Power Elevation & Clamp CINCINNATI BICKFORD Super Service 17” Col. x 7’ Radial Arm Drill, S/N 5E-184, Power Elevation (Motor Missing)
TOOLROOM EQUIPMENT
MARVEL Series 8 Mark II Vertical Band Saw Line, S/N 826833, Tilt/Traveling Head, 24” x 33” Work Table, 50-450 FPM, 90’ x 39” Power Feed Conveyor, 40’ x 39” Power Exit Conveyor ENCO 16” x 36” Engine Lathe, S/N 602520, 10” 3-Jaw Chuck, 16” Swing Over Bed, 6” Swing Over Carriage, 36” Between Centers, 3” Through Spindle, 24-1,600 RPM, Threading, Foot Brake, Removable Chip Pan, Coolant, Acu-Rite 2-Axis DRO 10” Mitering Base Cold Saw • 20” Abrasive Cut-Off Saw ENCO 3-HP Vertical Mill, 9-3/4” x 54” T-Slot Table, 50-4,250 RPM, AL-300S Table Feed TREE Vertical Mill, 10-1/2” x 42” T-Slot Table, 60-3,300 RPM (Parts/Repair) (2) ENCO 105-1300 Mill Drills POWER DRIVE SQ 50 Threader to 2” Capacity 1-1/2” Hydraulic Tube Bending Press OLIVER OF ADRIAN Drill Point Grinder Double End Pedestal & Bench Grinders to 12" Hydraulic Power Supplies • ENERPAC Rams & Hand Pumps • End Mills • Taps • Reamers • Mill Hold Down Tooling • Criterion Offset Boring Head
CRAWLER CRANES
LIMA 175-Ton Crawler Crane, Model 1500SC, S/N 747-A-116, Cummins Diesel, 42” Pads, 120’ Boom (Est.), Load & A2B Load Shift Monitors, Model 777 & 939 P & H 100-Ton Crawler Crane, Model 5100, S/N 51276, Diesel, 36” Pads, 100’ Boom (Est.), Greer Load Scale, Model LALT-1151L, 2,572 Hours 150’ Lattice Boom
All double girder, top-running bridge & hoist, 61' span w/remotes
(2) 2009 NORTH AMERICAN / DELTA SERVICES 30-Ton Bridge Cranes, S/N DS121808KT02, DS121908KT01 (#25 & #26), Radio Remote Control, R&M Hoists, Purchased New 12/2008 at Cost of Approx. $175,000 Each (Not Including Installation) NORTH AMERICAN 20-Ton (#13) WHITING 20-Ton (#28) WHITING 15-Ton (#31) 20-Ton (#39) 10-Ton (#32) P&H 15-Ton, Fish Belly (2) 5-Ton x 16’ Span Single Girder Bridge Cranes, Underhung Bridge & Hoist, 6-Way Pendant
MATERIAL HANDLING
2009 TECHNOMAGNETE 15-Ton Lifting Magnet, Model MTE-TM6-140-N, 30,865-lb. Max, Expandable GROVE 12,000-lb. Carry Deck Crane, Model IND 36, S/N 33846, Gas, Outriggers (7) Spreader Beams: 10’ to 47’ GENIE Platform Scissor Lift, Model GS-3268RT, LP, Pneumatic Tires (100+) 2-Way & 3-Way Lifting Chains • (75+) Plate Clamps up to 2”/8-Ton Capacity • 1” Diameter Lifting Cables • Crane Forks • 2-Ton Chain Fall Hoists, Come-A-Longs • Machine Clamps • 2-Wheel Hand Carts
2009 GMC 2500HD P/U Truck, VIN 1GTHC49K99E106503, Extended Cab, Gas, Automatic, AM/FM, Air, Cloth, 21,127 Miles 2008 HONDA ACCORD, VIN 1HGCP36888A055536, Automatic, AM/FM, Air, Leather, Sunroof, 78,171 Miles 2003 FORD F150 P/U Truck, VIN 1FTRX17W82KE33849, Extended Cab, Gas, Automatic, AM/FM, Air, Cloth, 127,119 Miles 2000 DODGE RAM 1500 P/U Truck, VIN 1B7HC16Y9YS65123, Gas, Automatic, AM/FM, Air, 185,895 Miles 1997 CHEVROLET 2500 P/U Truck, VIN 1GCFC24R8VZ132237, Gas, Automatic, 187,108 Miles
TRAILERS
LOADCRAFT 4-Axle Drop Deck Trailer, 10’ Upper Deck, 32’ x 96” Main Deck, Wood/Steel BIG TEX 7’ x 16’ T/A Trailer, VIN 16VPX1629VIF_9984 S/A Stinger
FORKLIFTS
CLARK 52,500-lb. Forklift, Model CY525D, S/N CY525D-2-2183, Diesel, 168” Lift, Pneumatic Tires, Dual Front, Enclosed TAYLOR 30,000-lb. (est), Forklift, Gas, Single Stage Lift, Pneumatic Tire, Dual Front, ROPS HYSTER 24,000-lb. Forklift, Model H250E, Diesel, 212” Lift, Pneumatic Tire, Dual Front, ROPS CLARK 15,000-lb. Forklift, LP, Single Stage Mast, Pneumatic Tires, ROPS CATERPILLAR 4,000-lb. Forklift, Pneumatic Tires (Parts/Repair)
RAW MATERIAL
Plate-Partial Inventory, Most w/Beveled Edges, Types A709-36 & A572-50 (6) 37’ x 115” x 3/4” • (2) 46’ x 108” x 3/4” • (5) 35’ x 108” x 3/4” • (1) 38’ x 108” x 1/2” • (2) 40’ x 75” x 1-1/2” • (4) 46’ x 108” x 1-1/2” • (1) 30’ x 96” x 2-3/4” • (1) 13’6” x 90” x 2-1/4” • (14) 33’ x 120” x 7/16” • (7) 47’ x 106” x 1” • (1) 46’ x 113” x 1” • (1) 46’ x 108” x 1” • (1) 45’ x 108” x 1” • (1) 44’ x 75” x 1” • (2) 46’ x 108” x 1” • (4) 46’ x 114” x 1.1” • (1) 13’ x 96” x 1” • (2) 40’ x 96” x 1/2” Angle, Tube, Rod Stock, I-Beams, Diamond Plate, Aluminum Grating
AIR COMPRESSORS
(2) QUINCY QSI-500 Rotary Screw Type Air Compressors (3) INGERSOLL RAND SSR EP100 100-HP Air Compressors, S/N F15029U95243, F13778U96254, F18133U97137 SULLAIR 185 John Deere Air Compressor, Diesel Power, Trailer Mount ZEKS Nomonox Breathing Air Purifier • 900 Gallon Air Header Tank
MISCELLANEOUS
Large Scrap Steel Inventory, Plate Drops, Work in Progress, Machines, Assembly Fixtures Remaining Machine Parts Inventory, Bearings, Filters (20) 6’ x 46” Rail-Mounted Transfer Carts, 38” Track Centers (44) 16” x 4” Steel Rail Wheels • (8) 11-1/2” x 21-3/4” Steel Rollers Spool of 1” Crane Cable (40) Cases of Paint & Dust Collector Filters (500) Shoring Timbers, 12” x 12” x 124’ • (2,400) Landscape Timbers Electric DC Motors to 50-HP • Gear Reduction Drives Hardware to 1-1/2” Steel Cabinets • Shelving • Steel Layout Tables • Welded Material Racks • (40) 29"H Metal Horses, 8’ - 16’ Lengths • (25) Fiberglass & Aluminum Folding Ladders to 16’ • (100) Sections 18"W Aluminum Tower Ladder FENWAY Electric Hand Nibbler • Hand Plate Beveller • (2) HD Magnetic Base Drills • (1) Hougen Magnetic Base Drill • Electric Hand Drills • (200+) Assorted Pneumatic Hand Tools • Grinders • Chisels • Impacts • Orbital Sanders • Grinding Wheels • Air Line Fittings • Fuses • Sockets • Hand Tools
OFFICE
(5) Executive Office Sets • (10) Laminate & Wood Desk Sets • Conference Tables: 125” x 48” w/(10) Chairs • 96” x 48” w/(4) Chairs • Receptionist Area • File Cabinets • Bookcases • Credenzas • Art Work • Chairs Roll Printers: SUMMA DC4 & HP Designjet 500 • HP & CANNON Printers & Fax Machines • (15) Assorted Pentium Computers & Flat Screen Monitors